Atlas Copco India Ltd.

Usage/Application	Assembly tools, drills and small grinders
Size	6.3 to 10 mm
Thread Size	1/2 BSP to 3/8 BSP
Temperature	-20 deg C to 80 deg C
Model Name/Number	ErgoQIC 08US
Working Pressure	Max 16 bar
Flow Rate	Max 17 l/s (0.5 bar),11 l/s (0.2 bar) (Economical)
Connection	Hose,Male,Female
Brand	Atlas Copco

The ErgoQIC 08US is a full flow quick coupling with no air restriction inside the coupling suitable for assembly tools, drills and small grinders. Upgrading any air system with ErgoQIC08US will give the benefit of productivity and energy efficiency.

Features:

• Ergonomic design, small size and low weight.
• Strong and durable
• Safety feature according to EN 983 / ISO 4414

Size	1" to 1 7/8"
Brand	Atlas Copco
Model Number	BCHN0875 to BCHN6000
Bolt Load	190 to 5655 kN
Height	48 to 176 mm
Type	Bottom collar hydraulic nut

Hydraulic Connections
User configurable quick release connections. Side and top connections available

Nut Body
Designed with considerable allowable piston movement. 

Hydraulic Seals
Proven seal technology ensures many thousands of tool pressure cycles

Load Retaining Collar
The tension is permanently retained by means of the load retaining collar. 

Tentec Hydraulic Nuts offer an extremely rapid and simple method of simultaneously accurately tensioning every bolt on a bolted joint. Hydraulic Nuts become a permanent part of the bolted joint and remain on the joint after the bolt load has been generated.

Usage/Application	Assembly tools, drills and small grinders
Size	6.3 to 12.5 mm
Thread Size	1/2 BSP to 3/8 BSP (MT),1/2 BSP to 3/8 BSP (FT)
Temperature	-10 deg C to +70 deg C
Model Name/Number	ErgoQIC 08E
Working Pressure	Max 16 bar
Flow Rate	Max 38 l/s (0.5 bar),24 l/s (0.2 bar) (Economical)
Connection	Hose,Male thread,Female
Brand	Atlas Copco

The ErgoQIC coupling is a ball valve coupling with a safety feature offering a higher flow than ordinary coupling systems. The ErgoQIC is a strong and durable full flow quick coupling with no air restriction inside the coupling. It is suitable for assembly tools, drills and grinders. Upgrading any air system with ErgoQIC will give the benefits of productivity and energy efficiency. ErgoQIC is designed to minimize the risk of sudden component separation and sound bang. The safety features are according to EN 983 and ISO 4414. It is made of hardened steel. The ErgoQIC disconnects in two steps; first you push in and bend slowly – the pressurized air hose will then vent, and as a second step you can disconnect without risk of harming the operator

Usage/Application	Assembly tools, drills and small grinders
Size	8 to 13 mm
Thread Size	1/2 BSP/ NPT to 3/8 BSPT/ NPT (Male Thread),1/2 BSP/ NPT to 3/8 BSP/ NPT (Female)
Temperature	-20 deg C to 80 deg C
Model Name/Number	NIP 10US
Working Pressure	Max 16 bar
Flow Rate	43 l/s (0.5 bar),27 l/s (0.2 bar) (Economical)
Brand	Atlas Copco

We are offering Atlas Copco NIP 10US Quick Release Coupling to our customers.

Usage/Application	Assembly tools, drills and small grinders.
Size	6.3 to 12.5 mm
Thread Size	1/2 BSP to 3/8 BSP (MT),1/4 BSP to 3/8 BSP (Female)
Temperature	-10 deg C to +70 deg C
Model Name/Number	ErgoQIC 08
Working Pressure	Max 16 bar
Flow Rate	Max 29 l/s (0.5 bar),18 l/s (0.2 bar) (Economical)
Connection	Hose,Male Thread,Female
Brand	Atlas Copco

We are offering Atlas Copco ErgoQIC 08 Quick Release Coupling to our customers.

Usage/Application	Industrial
Brand	Atlas Copco
Model	SMC
Max Torque	12 to 300 Nm / 8.9 to 221 ft.lb
Length	516 to 1078 mm (Min),1128 to 2633 mm (Max)
Tool Holder Swivel Angle	20 to 60 deg
Weight	0.37 to 2.81 kg / 0.816 to 6.20 lb
Tool Holder Interface	Type A,Type B

The Atlas Copco carbon arms have a telescopic design for maximum flexibility in the workplace. The carbon arms are light weight with smooth movements to reduce the operator force to use the arms. Together with a balancer the carbon arms can either retract up or be used in a weightless position to improve operator comfort. The carbon arms minimize reaction force to prevent hand-arm- shoulder disorders. With minimized reaction force of the tool you will also improve finished product quality because there is no movement of the tool and all torque is absorbed in the joint.

Usage/Application	Industrial
Material	Aluminum
Brand	Atlas Copco
Max Tool Weight	2.0 kg / 4.4 lb
Max Torque	25 Nm / 18.4 ft.lb
Max Reach	710 to 870 mm (without tool holder)
Stroke Size	300 to 400 mm (Horizontal and vertical)
Tool Holder Interface	Type A

The SMF-25 torque arms are labor-saving extensions of the Atlas Copco hand-held tools. They are suitable for straight and pistol assembly tools. The parallel torque arm has a foldable and space- saving design that eliminates the weight and torque of the tool, thus improving operator ergonomics, providing accurate tightening and contributing to increased productivity.

The SMF-25 arm range has a bench stand with a working area allowing tool setups weighing. These arms can also be used with a wall mount, therefore making them suitable for either flat wall surfaces or structural framing systems in assembly environments. All related accessories and tool holders need to be ordered separately.

Features:

• Robust construction that diminishes the transferred force to operator and extends product longevity.
• Springs included to eliminate tool and arm weight from the operator.
• Reaction force minimized to prevent hand/arm/shoulder disorders.
• Improved product quality due to torque absorption in the joint and no movement of the tool.

Usage/Application	Industrial
Brand	Atlas Copco
Max Torque	10 to 25 Nm / 7.4 to 18.4 ft.lb
Length	713 to 1131 mm (Min), 1013 to 1731 mm (Max)
Tool Holder Swivel Angle	8 to 60 deg
Weight	1.4 to 4.0 kg / 3.1 to 8.7 lb
Tool Holder Interface	Type A
Model Number	SMC-TT

The SMC-TT torque arm range from Atlas Copco consists of three models. The SMC-TT torque arms are designed to be used in combination with handheld straight and angle tools, including both electric and pneumatic. They are suited to be utilized for various rail and roof-mounted applications in all sorts of assembly environments. The product range has a modular setup with several available combinations and accessories to provide the most efficient and ergonomic workstation. The availability of a rigid top fixation allows the SMC-TT arm to be fastened to a roof attachment. The 10 Nm torque arm is available in one length version and the 25 Nm models are available in two length variants to achieve better reach.

Features:

• Easy to position and handle torque arms that allow for smooth movements to achieve operator comfort.
• Telescopic design for maximum flexibility with an extensive working range.
• Easy to use together with balancer to create weightless solution leading to improved operator ergonomics.
• Minimized strain to prevent wrist/arm/ shoulder injuries due to repetitive use
  Improved finished product quality with all torque absorbed in the joint and no movement of the tool.
• Improved finished product quality with all torque absorbed in the joint and no movement of the tool.

Usage/Application	Recommended for screwdrivers,impact wrenches,pulse tools,drills,chipping and riveting hammers
Brand	Atlas Copco
Pressure	15 bar
Model Name	HM Open XL
Hose Length	10 - 30 m
Hose Type	Rubber
Hose Inside Diameter	12.5 - 25 mm
Connection Inlet Hose Diameter	12.5 - 25 mm
Connection Distribution Hose	3/4 - 1 BSP
Economical Air Flow	8 - 60 l/s (at 0.2 bar)
Maximum Air Flow Capacity	12 - 95 (at 0.5 bar)
Weight	27 - 30 Kg
Working Temperature	-10 deg C to +60 degC
Inlet Hose Length	1 m

Hose reels in the HM Open XL series have an open die cast aluminium casing and 3/8" or 1/2" hose.

• Spatter resistant rubber hose.
• Floor, wall or ceiling mounting.
• Revolving hinge for flexible use.

Usage/Application	Used with pneumatic tools
Brand	Atlas Copco
Pressure	15 bar
Model Name	HM Open
Hose Length	10 - 20 m
Hose Type	Rubber
Hose Inside Diameter	10 - 12.5 mm
Connection Inlet Hose Inside	12.5 mm
Connection Distribution Hose	3/8 and 1/2 BSP
Economical Air Flow	5 -13 l/s (at 0.2 bar)
Maximum Air Flow Capacity	7 - 22 (at 0.5 bar)
Weight	11 -14 Kg
Mounting Type	Floor, wall or ceiling mounted
Working Temperature	-10 deg C to +60 deg C
Inlet Hose Length	1 m

The HM Open has an open composite casing, steel frame and 10 mm or 13 mm hose. HM Open is a reliable, medium sized hose reel recommended for screw-drivers, impact wrenches, pulse tools, drills, chipping and riveting hammers and grinders up 1000 W.

• Spatter resistant rubber hose.
• Outlet roller position can be adjusted through 120 degrees for optimal pull-out angle.
• Hose end provided with steel spiral hose protector (NPT and BSP).
• Latch function is easily disengaged.
• Spring tension is easily adjusted.

Usage/Application	Pneumatic Connections
Brand	Atlas Copco
Material	Hardened steel
Size	6.3 to 25 mm
Product Type	Claw Coupling
Surface Finishing	Zinc plated
Temperature	Max 80 deg C (176 deg F)
Connection Type	Hose, Lock nut hose, Male thread, Female thread
Working Pressure	Max 10 bar
Bore	5.0 to 25.5 mm

CLAW couplings are made from drop forged steel which can withstand rough treatment and ensures a long life even under difficult conditions. The coupling head is the same for all sizes, which can therefore be freely combined.

Features:

• Large bore – machined surfaces give low air resistance and minimum pressure drop
• Robust claws – will withstand rough handling without deformation.
• Locking lugs – precision made to provide a reliable lock.
• Special rubber packings – resistant to oil and temperature changes.
• Packing seats – lathe turned grooves ensure a leak proof seal.
• Couplings are effectively treated against corrosion.
• Available with extra protective cover.

Capacity	0.0-0.5 to 6.0-10.0 kg
Usage/Application	To Hang Load
Material	Mild Steel
Weight	0.6 to 3.2 kg
Brand	Atlas Copco
Cable Length	1.5 to 2.4 m
Model Name/Number	RIL
Size/Dimension	51 to 84 x 106 to 190 x 238 to 369 mm
Type	Spring Tool Balancer

RIL balancers always keep the tool in place, handy and easily accessible. RIL balancers are available as retractors or weightless positioning balancers. Safety chain included with all RIL balancers.

RIL Retractors:

• Adjustable wire stop
• High quality spring and construction

Brand	Atlas Copco
Working Pressure	1.5 to 16 Bar at inlet,0.5 - 10 Bar at outlet
Model Name/Number	MIDI Series
Max Flow	59 to 134 l/s
Port Size	1/2 inch BSP
Material	Plastic,PC with PA bowl guard (Bowl)
Drain Type	Automatic
Max Condensate Capacity	31 cm3
Max Oil Capacity	80 cm3
Weight	0.4 to 1.16 kg
Filter Element	5 micro m
Medium	Compressed air,neutral gases
Working Temperature	-10 deg C to 50 deg C

Sinter filter centrifugal principle, diaphragm-type pressure with relieving feature, lubricator with automatic oil filling. 

Airline regulators used for natural gases and compressed air with built in lockable setting knobs are used to supply a constant flow of air to as required to maintain the efficiency of the tool being used. The air pressure regulator ensures that the pre-set working pressure remains constant regardless of pressure variations in the intake air and minor variations in the air flow rate. By preventing unnecessary consumption of air, the air pressure regulator improves overall operating economy. Regulators are used to provide consistant air pressure to the tool at all times and to prevent minor air flow fluctuations that can affect the performance of the tool.

Brand	Atlas Copco
Size	3/4 - 1 inch BSP
Usage/Application	Pneumatic tools
Drain Type	Automatic
Model Name/Number	MAXI Series
Max Flow	134 to 237 l/s
Working Temperature	-10 deg C to +50 deg C
Weight	0.8 to 1.29 kg
Filter Element	5 micro m
Material	Plastic,PC with PA bowl guard (Bowl)
Pressure	1.5 to 16 Bar at inlet,0.5 - 10 Bar at outlet
Medium Type	Compressed air,neutral gases.
Max Condensate Capacity	69 cm3
Max Oil Capacity	181 cm3

The high flow MAXI air preparation unit's main application is to prepare the air for pneumatic tools which are large air consumers when long distribution hoses and multi connectors are used. A good example is Atlas Copco Turbo grinders. Sinter filter centrifugal principle, diaphragm-type pressure with relieving feature, lubricator with automatic oil filling.

Lubrication for more power and longer lifetime of the tool, lubrication is essential to prolong the life of the vane in the tool motor (unless stated otherwise). The life of the vanes may decrease to as little as 1/10th of the normal working time. Tests in Atlas Copco laboratories Showed that the power output of a grinder decreases by 15-20% after 20 minutes when not lubricated. With the use of a lubricator you will prolong the lifetime of a vane motor up to three times and the motor will work much more efficiently, and with less friction. F/R units are combined filter / regulators assembled together. F/R units are recommended in every case where both filters and regulators are needed. Filtering and regulating and lubricating properties are almost the same as for individual units.

Brand	Atlas Copco
Size	1/4 inch BSP
Usage/Application	Small tooling applications
Drain Type	Automatic
Working Pressure	Max 10 bar (232 psi)
Model Name/Number	MINI Series
Max Flow	29 to 37 l/s
Working Temperature	-10 deg C to 50 deg C
Weight	0.62 to 1.05 kg
Filter Element	5 micro m
Material	Plastic,PC with PA bowl guard (Bowl)
Pressure	1.5 - 16 Bar at inlet,0.5 - 10 Bar at outlet
Max Oil Capacity	40 cm3
Max Condensate Capacity	10 cm3
Medium Type	Compressed air and neutral gases

Air preparation unit MINI-Range main application is to prepare the air for pneumatic components. Sinter filter centrifugal principle, diaphragm type pressure with relieving feature, lubricator with automatic oil filling.

Separating water and solid particles from the airline and compressor. Using filters results in higher quality air, you ensure longer service intervals, improved efficiency. Based on the centrifugal phenomena, gravity and centrifugal force, remove the heavy water partials resulting in minimum contamination of the tools motor and body from dirt particals. Atlas Copco filters separate up to 98% of the water when operating within the design working range. With auto drainage the bowl is emptied when the accumulated water reaches a certain level.